30
FPPBC25-6
In more detail . . .
Stopping the engine
1. Release the throttle trigger (19) and let the machine run in idle for a while.
2. Set stop switch (20) to STOP.
WARNING! The machine continues to work for some time even after the
engine has been stopped! Wait until it comes to a complete stop before you
put the machine down!
Trimmer line feeding
The trimmer head (28) is equipped with a bumper help to feed the cutting line (31). Simply
tap the bumper on a rm ground while the machine is operating, the spool will release
fresh trimming line. A cutting line cutter (32) is integrated with the trimming guard (27)
and it cuts the line to necessary length (Fig. 23).
23
Operation
To Next Page
Loading...