HOW TO OPERATE THE GRINDER?
Remove the receiver. Position and continue to hold the grinder as
demonstrated in the image for the subsequent steps.
1.
Rotate the spin dial clockwise until there is resistance; do not overtighten
the part.
2.
Rotate the spin dial counterclockwise to the recommended grinding clicks
(Please refer to the table below).
3.
Tighten the receiver and remove the handle. Place 20~25g of coffee beans
on the grinder.
4.
Reattach the handle and start grinding.5.
RECOMMENDED GRINDER SETTINGS
※One round is equivalent to 40 clicks.
※For reference only; adjustments may be made according to personal preference.