Take out the black O-ring from the groove on the PC lid.1.
Insert the provided white O ring.2.
Ensure that the white O-ring is correctly installed into the groove on the
handle for proper fixation.
3.
HOW TO ASSEMBLE THE PC LID AND HANDLE?
6.35mm(1/4 inch) Hex Shank.
HOW TO USE IT BY ELECTRIC?
You need to prepare:
Take out the handle and install
the black O-ring to the PC lid.
Ensure that the bit holder is fully inserted
into the center shaft, grasp the grinder
firmly, and gradually apply power.
Electric screwdriver at a 15~25Nm torque.
※Slow down the grinding speed to prevent damage to the central shaft.
To Previous Page
Loading...
