To Next PageTo Next Page
Need help?Do you have a question about the Kingsman ZCV39N and is the answer not in the manual?
General| Brand | Kingsman |
|---|---|
| Model | ZCV39N |
| Category | Indoor Fireplace |
| Language | English |
Critical safety warnings regarding fire, explosion, and hot surfaces.
Comprehensive list of warnings for safe fireplace operation and installation.
Mandates for CO detector installation as per Massachusetts codes.
Procedures for securing the appliance and proper electrical grounding.
Warning against compromising structural integrity during installation.
Table detailing clearances required from combustible materials.
Identifies required non-combustible areas for fireplace facing.
Lists kit components and provides assembly instructions for the safety screen.
Instructions for installing inside-fit safety screens.
Critical warning regarding handling the safety screen on a hot unit.
Instructions for assembling the components of designer doors.
Step-by-step guide for installing the assembled designer doors.
Provides steps for installing the Z46FK fan kit.
Emphasizes electrical grounding safety and pre-servicing precautions.
Highlights electrical safety warnings and installer cautions.
Step-by-step instructions for installing fireplace liners.
Provides steps for installing brick-style fireplace liners.
Warns against improper part placement or using non-approved parts.
Crucial warning against covering the pilot shield area with media.
Warns against incorrect part positioning or using non-approved parts.
Warns against incorrect log placement or using non-approved parts.
Warning against covering the pilot area with media to avoid ignition issues.
Important note not to cover the pilot area to prevent delayed ignition.
Step-by-step instructions for installing the fireplace door.
Warning to wait until the unit is completely cool before handling the glass door.
Guidance on cleaning and maintaining the fireplace glass.
Information on connecting the gas line according to codes and standards.
Table detailing gas specifications, pressures, and orifice sizes.
Critical safety instructions to read before attempting to light the appliance.
Procedures for detecting gas leaks and emergency actions.
Step-by-step guide for lighting the millivolt pilot and burner.
Instructions on how to properly turn off the appliance.
Checklist of items to inspect annually for safe fireplace operation.
Procedure for testing the flame failure response time.
Crucial warnings regarding conversion kit installation and safety.
Warning that the conversion kit must be applied as part of a manufacturer-supplied kit.
Explains the components and operating principles of the IPI system.
Critical safety warnings to be read before lighting the appliance.
Step-by-step instructions for operating the IPI system.
How to adjust flame levels using the remote control.
Specifies mandatory clearances for vent terminals based on location and codes.
Detailed steps and clearance requirements for side wall venting.
Installation of attic insulation shields, fire stops, and roof flashing.
Instructions for installing the power vent control module.
Addresses common issues like igniter failure, pilot outage, and flame problems.
Emphasizes safety around hot glass and the use of protective barriers.
Warnings regarding hot termination caps, clearances, and obstructions.
