07 08
1. Choose flat ground to place the
WalkingPad. It is forbidden to place it
on thick and soft cushion. Please note:
Don't connect the power before the
WalkingPad is fully unfolded.
4. Connect the power cord and press
the button to switch on.
2. Unfold the walkingpad slowly and
press it down to completely flat.
3. Check and adjust the walking belt
to make sure it's centered.
10. If the belt deviates from the orbit in
use, please adjust properly.
SEE: 06 Maintenance and Service.
5. Search ''WalkingPad" App from
Apple Store or Google Play and
complete installation.
6. Open the App, follow the prompts
to set up the device.
8. Complete Novice Guide to unlock
all Functions ( maximum speed
6km/h 3.7 mi/hr ). Otherwise the
speed limit remains at 3km/h 1.7
mi/hr.
7. Enter Novice Guide. 9. Start to use the WalkingPad.
3. Guide for Initial Operation
To Next Page
Loading...
