10
-13PERIODIC SERVICE
EVERY 50 HOURS
LUBRICATING GREASE FITTINGS
You should apply a small amount of multi-purpose grease to the following points every 50 hours or as needed.
If your tractor is operated in extremely wet, muddy, or dusty conditions you should lubricate the fittings more often.
(1) Grease Fitting (Front bracket axle pivot)
(2)
Grease Fitting (Power steering cylinder)(RH,LH)
(1) Grease Fitting (Brake Lever RH, LH)
(1)
Grease Fitting (Power steering cylinder) (RH, LH)
(1) Grease Fitting (RH)(Lift Rod)
(1) Grease Fitting (Rear Bracket Axle Pivot)
051OA20C
051OA23C
051OA21C
051OA24C 051OA25C
To Next Page
Loading...
