CK25/30/351-4
A ROPS should never be modified by
welding, grinding or cutting, as this can
weaken the ROPS structure. If any
components of the ROPS unit is
damaged, it must be replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original positions
and all bolts should be properly torqued.
21. Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you
should adjust your rear wheel tread
width, see page 8-3.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and parking
brake is applied.
20. For your safety ROPS with a seat
belt is recommended for all
applications.
(1) Tread
704O106C
704O107C
zz
zz
z Always use seat belt when the trac-
tor is equipped with a ROPS. Never
use the seat belt when tractor is
not equipped with a ROPS.
NOTE
To Next Page
Loading...
