When driving on downhill with an
empty bucket and rear ballast in-
stalled, keep the rear ballast toward
the higher level of the ground. In
other words, drive backward on uphill
and forward on downhill.
Use the 4WD to increase friction
when driving on a slope with a load-
ed bucket and rear ballast installed.
Set the bucket and implement high
on a rough surface so that they are
not caught by obstacles.
PARKING WITH LOADER INSTALLED
M55O625A
When parking the tractor which
is equipped with a loader or
backhoe, make sure that the
loader or the boom of the back-
hoe is lowered on the ground.
Otherwise, the tractor can be-
come unstable, leading to an
unexpected accident, such as
roll over.
WARNING
To Next Page
Loading...
Need help?
General
