9. Check for correct coupling be-
tween tow hook and trailer. See
the Towing Attachments chapter.
10. Use ballast weight as recom-
mended. Never add more ballast
to compensate a higher load than
allowed. Reduce load for safety.
11. A safety chain will help control
drawn equipment should it be
accidentally separated from the
draw-bar while transporting.
H11O682A
12. If the front of the tractor tends to
rise up when heavy implements
are attached to the three point
hitch, weights should be installed
on the tractor. Do not operate the
tractor with a light front end.
T66O112A
Using the proper adaptor parts,
attach the chain to the tractor
draw-bar support or other speci-
ed anchor location. Provide only
enough slack in the chain to per-
mit turning. See your Dealer for a
chain with a strength rating equal
to, or greater than the gross
weight of the towed machine.
To Next Page
Loading...
