5-4 DK451/501/551
1. MAKE SURE THE PARKING BRAKE IS
SET.
(1) Pull(push) the parking brake lever
while fully depressing the pedal af-
ter connecting the left and the right
of the brake pedal. The “P” lamp in
the instrument panel turns on
when the key is inserted while
brake engaged.
(2) To release the parking brake press
the brake pedals again.
A12O502A
2. Place the P.T.O switch to the off position.
(1) PTO Switch
- ON - OFF
A12O501A
(1) Parking Brake Lever
(A) Lock
IMPORTANT
Make sure that the parking brake
pedals are fully depressed before
pushing the brake lever up
OPERATING THE ENGINE
WARNING
Carefully read and understand the
instructions in “Safe Operation”
chapter in the owner’s manual
and warning and warning plates
attached to the tractor.
Avoid engine starting in con-
cealed space as much as possible.
It may be fatal. Do so only with
proper ventilation.
When stating the engine, apply the
parking brake after positioning
the main shift lever to Neutral
position and turning the PTO
switch to OFF.
Do not start the engine with un-
seated in driver’s seat since it may
cause unwanted accident.
STARTING THE ENGINE
To Next Page
Loading...
