OPERATING 5-5
A12O503A
3. Place the main shift lever and the P.T.O
change switch in the neutral position.
(1) Main Shift Lever (2) P.T.O Change Switch
A12O504A
4. Lower the attachment by pushing the
position control lever forward.
A12O505A
5. Pull the hand accelerator lever
halfway.
6. Step on the clutch pedal.
(1) Position Control Lever
(1) Hand Accelerator Lever
(A) Decrease
(B) Increase
WARNING
If you do not step on the clutch
pedal, the safety switch will not
operate so that the engine is not
starting.
To Next Page
Loading...
