LOADER REMOVAL 7-3
STEP 6.
Pull the control lever to raise the loader until the loader break
way from the mounting frame. Adjust the bucket until the
bottom surface of bucket touch the ground.
STEP 7.
Move the tractor backword slowly and stop to avoid the
hydraulic hoses being tighten.
STEP 8.
Stop the engine and move the control lever back and
forth, left and right several times to reduce the hydraulic
pressure in the hoses.
STEP 5.
Remove the latch pin while move the control lever back
and forth slightly to make the latch pin easy.
(1) Latch Pin
7
To Next Page
Loading...
