A ROPS and CAB should never be
modied by welding, grinding or cut-
ting, as this can weaken the ROPS
structure. If any components of the
ROPS unit is damaged, it must be
replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be tted back to their original posi-
tions and all bolts should be properly
torqued.
21. Extra caution should be taken
when driving tractors with nar-
row tread widths. For added sta-
bility you should adjust your rear
wheel tread width, see page 8-3.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position.
20. For your safety ROPS with a seat
belt is recommended for most
applications.
(1) Tread
S41O106a
S41O107a
Always use seat belt when
the tractor is equipped with a
ROPS and CAB. Never use
the seat belt when tractor is
not equipped with a ROPS and
CAB.
NOTE
To Next Page
Loading...
