3. Before installing or using P.T.O driv-
en equipment, read the manufactur-
er’s manual and review the safety
labels attached to the equipment.
4. When operating stationary P.T.O
driven equipment, always apply
the tractor parking brake and place
chocks behind and in front of the
rear wheels. Stay clear of all rotat-
ing parts.
(1) 3-point hitch lowering speed knob
(A) “FAST” (B) “SLOW”
(C)”LOCK”
USING 3-POINT HITCH
1. Use the 3-point hitch only with
equipment designed for 3-point
hitch usage.
2. When using a 3-point hitch mount-
ed implement, be sure to install the
proper counterbalance weight on
the front of the tractor.
3. When transporting on the road, set
the implement lowering control in
the “LOCK” position to hold the im-
plement in the raised position.
(1) P.T.O Shaft Cover
(2) P.T.O Shaft Cap
OPERATING THE P.T.O
1. Make sure the tractor is complete-
ly stopped, gears are in neutral and
all moving components have com-
pletely stopped before connecting,
disconnecting, adjusting, cleaning
or servicing any P.T.O driven equip-
ment.
2. Keep the P.T.O shaft cover in place
at all times. Replace the P.T.O shaft
cap when the shaft is not in use.
S41O121aS41O120a S41O122a