Weight should be added to the rear
wheels only if it is needed to improve
traction or stability. The amount of
weight should directly correspond
to the job at hand and should be re-
moved when not needed.
The weight should be added to the
tractor in the form of liquid ballast,
rear wheel weights or both.
REAR WHEEL WEIGHTS
The rear wheel weights can be at-
tached to the rear wheel. See your
implement owner’s manual for the
proper amount of weight or consult
your local KIOTI dealer.
Front end weights can be attached to
the front of the tractors bumper. You
should consult your implement own-
er’s manual for the required amount
of weight or contact your local KIOTI
dealer for a recommendation.
REAR BALLAST
FRONT BALLAST
(1) Front End Weights
(2) Rear Wheel Weights
T46O803A
Maximum weight
17 kg X 4 Pieces
(150 lbs.)
Maximum weight
per wheel
25 kg X 6 Pieces
(331 lbs.)
FRONT END WEIGHTS
To avoid personal injury:
n e e de d f o r t ra ns po rt in g
heavy implements. When the
implement is raised, drive
-
last is used.
CAUTION
Never overload the tires.
IMPORTANT
Do not overload tires.
-
IMPORTANT
To Next Page
Loading...
