INITIAL 50 HOURS
CHANGING ENGINE OIL
1. To drain the used oil, remove the
drain plug at the bottom of the en-
gine and drain the oil completely
into the oil pan.
All the used oil can be drained out
easily when the engine is still warm.
2. After draining reinstall the drain plug.
3. Fill with the new oil up to the upper
notch on the dipstick.
(1) Oil Inlet (2) Dipstick
(A) Oil level is acceptable within this range
(1) Drain Plug
S41OA09A S41OA10A
(1) Engine Oil Filter
REPLACING ENGINE OIL FILTER
S41OA11A
Oil capacity
with filter
5.8 (1.53U.S.gals.)
To avoid personal injury:
Be sure to stop the engine
before changing the oil.
Allow engine to cool down
sufficiently, oil can be hot
and can burn.
CAUTION
To prevent serious damage to
the engine, use only a KIOTI
genuine lter.
IMPORTANT
To Next Page
Loading...
