K110sm6e1.doc
6-7
6. 2 Preventive Maintenance
Make the following maintenance to keep the machine in a good condition and to get a clear image.
The following list shows which part to make maintenance, when to do and what matter to do.
Cleaning
• Scan Glass
• Drive Roller
• Guide Plate
• Sensor
As needed
Scanner Adjustment
• Shading
• Color Correction
• Feed Distance
• Position
Every 300,000 - 400,000 sq.ft. ( see printer meter for
this estimated interval )
Refer to [8.4 Scanner Adjustment] for further information.
To Next Page
Loading...
