Kipor IG2000 Operation Manual

30
· Don't disconnect the PARALLEL I/O special connection cable and parallel output cable during
parallel operation; connect the PARALLEL I/O special connection cable before starting the
engine then connect the parallel output cable. You can disconnect the PARALLEL I/O special
connection cable and parallel output cable only after stopping the generator. If the parallel
output cable is still connected, cut off the current output after either generator was shut off.
· Don't use the parallel output cable and parallel connection cable while operating two
generators separately.

Kipor IG2000 Specifications

General

Rated Power	1.6 kW
Voltage	230 V
Frequency	50 Hz
Fuel Type	Gasoline
Starting System	Recoil
Weight	22 kg
Engine Type	4-stroke, OHV
Noise Level	54-59 dB(A)
Continuous Operation Time	4 h (at rated load)