Kipor IG2000 Operation Manual

29
Fig. 5
Note:
The required output of the electrical appliance cannot exceed the rated output of parallel
generators.
Shutting off the generators:
1. Turn off the power of electrical appliance, pull out the receptacle plug.
2. Turn off the two generators.
3. First disconnect the cable on the PARALLEL OUTPUT terminals of the two generators. And
then remove the PARALLEL I/O parallel connection cable.
· The special parallel cable for the IG2000p is only applicable to the parallel operation of two
IG2000p generators. It cannot be used for paralleling three or more generators or running two
different brands of generators.
Be sure to only use parallel output cable for parallel running.
· While connecting the generator and electrical appliance with the parallel output cable, do so
carefully and safely insert the plug into the receptacle.
· While operating in parallel, the only AC output is through the receptacle on the parallel cable
box. Don't use the receptacle on the control panel of the generator.

Kipor IG2000 Specifications

General

Rated Power	1.6 kW
Voltage	230 V
Frequency	50 Hz
Fuel Type	Gasoline
Starting System	Recoil
Weight	22 kg
Engine Type	4-stroke, OHV
Noise Level	54-59 dB(A)
Continuous Operation Time	4 h (at rated load)