L
lopezandreaJul 27, 2025
Why Kipor KGE3000Ti engine does not start?
- DDanny GarciaJul 27, 2025
If your Kipor Inverter engine isn't starting, several factors could be at play. It might be due to stale gasoline or a lack of fuel reaching the carburetor, in which case you should drain the old fuel and clean or replace the carburetor. Other potential causes include a clogged fuel tank tube (inspect it), a clogged fuel filter (clean it), or carburetor failure (clean or replace it). Also check if the spark plug cap is disconnected (install it securely), or if there's an ignition coil, spark plug, oil level switch, igniting device, or pulse coil failure (inspect and replace as necessary). Ensure the choke air inlet is properly controlled, set to either full open or half open.