Kipor Sinemaster IG3000 User Manual

22
CAUTION
■ Never run the generator without the air cleaner. Rapid engine wear may result.
1. Open the left side maintenance cover.
2. Unsnap the clips, remove the air cleaner cover.
3. Take out the element; blow the inner side of the element with compressed air to
remove the dust. If the element is very dirt, please replace it.
4. Reinstall the air cleaner cover; close the left side maintenance cover.
Fig. 16 Air cleaner cleaning
7.4 Spark plug service
Recommended spark plug: WR7DC
To ensure proper engine operation, the spark plug must be properly gapped and free
of deposits.
1. Open the left side maintenance cover.
2. Remove the spark plug cap.

Kipor Sinemaster IG3000 Specifications

General

Rated Power	2.8 kW
Maximum Power	3.0 kW
Max. AC Output	3.0 kVA
Rated Voltage	230 V
Rated Frequency	50 Hz
Power Factor	1.0
Engine Type	4-stroke, OHV, single cylinder
Displacement	196 cc
Fuel Type	Unleaded Gasoline
Fuel Tank Capacity	13 L
Starting System	Recoil start
Noise Level	65 dB at 7 m