Kipor Sinemaster IG3000 - Starting the Engine; Initial Fueling and Starting Caution; IG3000 Starting Procedure

12
4. Starting engine
CAUTION
■ When starting the generator after adding fuel for the first time, after long-term
storage, or after running out of fuel, turn the fuel valve lever to the "ON" position,
then wait for 10 to 20 seconds before starting the engine.
4.1 IG3000 starting order:
(1) Open the fuel valve first, see fig.8.
Fig.8 Fuel valve lever to the ON position
(2) Pull the choke knob out to the CLOSED position
Do not use the choke when the engine is warm or the air temperature is high, see
fig.9
Fig.9 Choke knob to the closed position