EasyManuals Logo

Kipor Sinemaster IG3000 User Manual

Kipor Sinemaster IG3000
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
15
5. Generator use
WARNING
Generator should be earthed in order to prevent electric shock caused by
incorrect operation. Coaxial cable should be used to connect the grounding terminal
of generator and outside grounding terminal.
Fig.13 Generator grounding diagram
CAUTION
Maximum power would be available for the first 30 minutes. Do not exceed the
rated power during continuous operations.
Socket current limit cannot be exceeded.
Do not connect generator to domestic circuit, or generator or appliances may be
damaged.
Don’t modify or use the generator for other purposes other than it is intended for.
Also observe the following when using the generator.
A. Do not connect generators in parallel under different voltage selections.
B. Do not connect an extension to the exhaust pipe.
When an extension cable is required, be sure to use rubber sheathed flexible
cable.(IEC245DV or relevant rules)
Length limit of extension cable: 60m of 2.5 mm
2
while 100m of 4 mm
2
.
Keep generator away from other circuits or cable such as: distribution net.

Other manuals for Kipor Sinemaster IG3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor Sinemaster IG3000 and is the answer not in the manual?

Kipor Sinemaster IG3000 Specifications

General IconGeneral
Rated Power2.8 kW
Maximum Power3.0 kW
Max. AC Output3.0 kVA
Rated Voltage230 V
Rated Frequency50 Hz
Power Factor1.0
Engine Type4-stroke, OHV, single cylinder
Displacement196 cc
Fuel TypeUnleaded Gasoline
Fuel Tank Capacity13 L
Starting SystemRecoil start
Noise Level65 dB at 7 m

Related product manuals