Why does my Kirby Lester Medical Equipment count by itself?
If your Kirby Lester Medical Equipment is counting by itself or displaying errors like E-1, E-9, or O-S, it's likely due to dust or residue on the glass detector windows, or the windows are cracked. Try cleaning the glass detector windows thoroughly. If the glass is cracked, the unit needs to be sent in for repair.
Why is my Kirby Lester Medical Equipment overcounting pills?
If your Kirby Lester Medical Equipment overcounts, meaning it counts more pills than you poured, the cause might be dust or residue on the glass detector windows, cracked windows, or pill fragments that were poured through. You should thoroughly clean the glass detector windows and remove any pill fragments. If the glass is cracked, send the unit in for repair.
What to do if my Kirby Lester Medical Equipment undercounts pills?
If your Kirby Lester Medical Equipment undercounts, meaning it counts fewer pills than you poured, it could be because you are pouring too fast or directly into the funnel hole. Try slowing down your pouring speed, so the 'Pour Slower' indicator does not activate.
Why is my Kirby Lester KL1 Medical Equipment beeping?
If your Kirby Lester KL1 Medical Equipment is beeping, it means medications are still in the tray. Simply empty the tray.
What to do if my Kirby Lester Medical Equipment display flashes '----'?
If the display on your Kirby Lester Medical Equipment flashes "----" instead of "0000" when the tray is pushed in, it could be that the tray isn't fully inserted or the tray sensor window is dirty. Make sure the tray is fully inserted and clean the tray sensor window.
Why is the display flashing on my Kirby Lester Medical Equipment?
If the display on your Kirby Lester Medical Equipment is flashing, it indicates that the tray is missing. Empty the tray, then fully insert it.
Why does my Kirby Lester Medical Equipment read '0000' with the tray not fully inserted?
If your Kirby Lester Medical Equipment displays "0000" even when the counting tray is not fully inserted, the tray sensor might be dirty or damaged. First, try cleaning the tray sensor window. If that doesn't work, the unit may need to be sent in for repair if the tray sensor is damaged.
Alerts user when pouring speed is too fast, requiring slowdown for accurate counting.
Alerts user to detect partial tablets/fragments, prompting inspection and removal.
Mode for counting unique, odd-shaped, or semi-translucent tablets and capsules.
Mode for counting large quantities of tablets/capsules exceeding tray capacity.
Instructions for cleaning the funnel and channel using mild soapy water.
Guide to cleaning glass detector windows to maintain counting accuracy.
Procedure for cleaning the counting tray with mild soapy water.
Instructions for cleaning the tray sensor window to ensure proper seating detection.
General| Brand | Kirby Lester |
|---|---|
| Model | KL1 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
