16 | USING THE STAND MIXER
USING THE STAND MIXER
3
To remove pouring shield:
Turn speed control to “0”.
Unplug Stand Mixer.
4
Lift the front of the pouring shield
clear of the bowl rim and pull forward.
Remove attachment and bowl.
USING THE POURING SHIELD*
1
For best results, rotate the shield
so the motor head covers the
U-shaped gap in the shield. The
pouring chute will be just to the
right of the attachment hub as
you face the Stand Mixer.
2
Pour the ingredients into the bowl
through the pouring chute.
Use the pouring shield to avoid having ingredients splashing out of the bowl when
mixing, as well as to easily pour ingredients into the bowl while mixing.
*Included with select models only. Also available as an optional accessory.
To Next Page
