What to do if my KitchenAid 5KPM5 stops working?
First, ensure the KitchenAid Stand Mixer is properly plugged into a working outlet. Next, verify that the fuse or circuit breaker for the outlet is functioning correctly. If it still doesn't work, turn off the mixer for 10-15 seconds, then turn it back on. If the Stand Mixer still does not start, allow it to cool for 30 minutes before turning it back on.
What to do if my KitchenAid Mixer won't turn on?
If your KitchenAid Mixer isn't working, first ensure it's properly plugged in and that the fuse or circuit breaker is functioning correctly. Try turning the mixer off for 10-15 seconds and then back on. If it still doesn't start, let it cool down for 30 minutes before trying again.
What to do if my KitchenAid Mixer stops due to overload?
If your KitchenAid Mixer stops because of an overload, slide the Speed Control Lever to Off (0). After a few minutes, the Stand Mixer will automatically reset. Then, slide the Speed Control Lever to the desired speed and continue mixing.
Why does my KitchenAid 5KPM5 get warm during use?
It is normal for the top of the KitchenAid Stand Mixer to become warm to the touch during heavy use or extended mixing times.
Why does my new KitchenAid Mixer have a smell?
A pungent odor from your new KitchenAid Mixer is common with electric motors.
How to fix a KitchenAid 5KPM5 Mixer speed control lever that is hard to move?
To move the Speed Control Lever on your KitchenAid Mixer more easily, lift it slightly as you move it across the settings in either direction.
Why does my KitchenAid 5KPM5 Mixer get hot?
It is normal for your KitchenAid Mixer to warm up during use.
Why does my KitchenAid 5KPM5 smell bad?
It is common for KitchenAid Mixers, especially when they are new, to emit a pungent odor due to the electric motor.
How to move the speed control lever on a KitchenAid Mixer?
To move the Speed Control Lever on your KitchenAid Mixer with ease, lift slightly up as you move it across the settings in either direction.
What to do if the problem with my KitchenAid Mixer cannot be corrected?
See the “Terms of KitchenAid Guarantee (“Guarantee”)” section. Do not return the Stand Mixer to the retailer; retailers do not provide service.
Basic safety precautions to follow when using electrical appliances.
Technical specifications and warnings regarding power supply.
Guidelines for responsible disposal of the appliance and packing material.
Step-by-step instructions for mounting the bowl and mixer attachments.
How to set the correct gap between the beater and the bowl for optimal performance.
Guide to using different speeds and their applications for optimal performance.
Instructions for detaching the bowl and mixer attachments after operation.
General advice and warnings for operating the stand mixer, including handling heat.
Guidance on determining appropriate mixing durations to avoid overbeating.
Advice on adding ingredients, handling solids, and mixing liquids for better results.
Important warnings regarding unplugging and water immersion during cleaning.
Addresses common concerns like warmth, odor, and beater clearance.
Checks for power, circuit issues, and restart procedures for non-operational mixers.
Details on warranty coverage, what is and isn't paid for by KitchenAid.
Contact information and procedures for seeking service and support.
General| Model | 5KPM5 |
|---|---|
| Type | Stand Mixer |
| Bowl Capacity | 4.8 L |
| Speeds | 10 |
| Voltage | 220-240 V |
| Color | Various |
| Material | Metal |
| Frequency | 50/60 Hz |
| Included Accessories | Flat Beater, Dough Hook, Wire Whip |
| Dimensions | 36 x 24 x 37 cm |
To Next Page