7
PRODUCT USAGE
INSTALLING THE REVERSIBLE SLICING/SHREDDING DISC OR
SLICING BLADE
To slice: Turn the disc so that the raised
slicing blade is facing up.
To shred: Turn the disc so that the small,
raised shredding blades are facing up.
1
Place disc high at top for processing. Place
disc low in bowl for storage.
NOTE: While the disc will operate in
storage position, it will not perform as well.
Make sure the disc is level with the top of
the bowl for best performance.
Process
Storage
Hold the centre hub of disc. Lower it on
drive adaptor aligning with given marks on
disc and adaptor.
2
Push the cover down to lock.
3
Alignment
marks
W11396222A_V5.indd 7 9/16/2019 4:56:46 PM
To Next Page
Loading...
