10
CARE AND CLEANING
Do not immerse base in water or other
liquid. Wipe the base and cord with a
warm, damp cloth and dry with a soft
cloth.
All parts are top rack dishwasher-safe.
Avoid laying the bowl on its side.
Thoroughly dry all parts after washing.
Use gentle dishwashing cycles such as
normal. Avoid high-temperature cycles.
1 2
IMPORTANT:
Unplug and wait until the blade or disc stops before cleaning.
NOTE:
For convenient storage, always reassemble the Food Processor and its accessories
after cleaning.
TROUBLESHOOTING GUIDE
Problem Solution
Is the Food Processor plugged in?
Unplug the Food Processor, then plug it back into the
outlet.
Have you pressed more than one
button at the same time?
Press only 1 or 2 to turn ON or press O/Pulse to use the
Pulse function.
Is the fuse in the circuit to the
Food Processor in working order?
If you have a circuit breaker box, be sure the circuit is
closed.
The Food Processor may need to
cool to room temperature.
If the speed light turns off and the O/Pulse light flashes,
wait until the O/Pulse light turns off and retry. The
Food Processor may take from 5 to 15 minutes to cool
completely.
The motor may be locked.
If the speed light stays on while the O/Pulse light
flashes, press the O/Pulse button to reset the motor.
Food Processor not shredding or
slicing properly:
1. Make sure the raised-blade side of the disc is
positioned face up on the drive adapter.
2. Make sure ingredients are suitable for slicing or
shredding.
3. Make sure the disc is positioned in the process
position (high at the top of the bowl), and not the
storage position (low and inside of the bowl).
If the work bowl cover won’t close
when using the disc:
Make sure the disc is installed correctly, and is
positioned properly on the drive adapter.
If the problem is not due to one of the above items, see the “Product Warranty” section.
Do not return the Food Processor to the retailer. Retailers do not provide service.
NOTE:
If washing the Food Processor parts by hand, avoid the use of abrasive cleansers or
scouring pads. They may scratch or cloud the work bowl and cover.
W11396222A_V5.indd 10 9/16/2019 4:56:47 PM
To Next Page
Loading...
Need help?
General
