KitchenAid 9 Cup - Attaching the Work Bowl Cover and Final Steps

14

•To use the Mini Bowl, place the
Mini Bowl over
the power base
shaft. Fit the
mini blade on
the power base
shaft. It may
be necessary to
rotate bowl and
blade slightly
so that they are
properly aligned and fall into place.
6. Place the work bowl cover on the
work bowl
with the
feed tube
just to the
left of the
work bowl
handle.
Grasp the
feed tube and turn the cover to the
right until it
locks into
place.
NOTE: Your
KitchenAid
®
Food
Processor
features a double interlock safety
system to insure that the unit will not
operate unless the work bowl and the
work bowl cover are properly aligned
on the power base.
NOTE: Never attach cover to the
work bowl before the work bowl has
been positioned on the power base
damage to the work bowl may result.
7. Fit the pusher into the feed tube and
plug unit into an electrical outlet.
NOTE: Never try to remove the work
bowl before unlocking the work
bowl cover (turning the work bowl
cover to the left). Damage to the work
bowl may result.
Assembling Your Food Processor
Pulse
On
C
AUTIO
N
: READ INSTRUC
TIO
NS BEFO
RE USING
Off
U
ltra
P
o
w
e
r
E
le
ctro
n
ic
C
o
n
tro
l