13. Plugin coffee mill.
14. Test the unit for proper operation at each grind setting. If you cannot operate the unit when it is set to Tine", then
remove the set screw and turn the grind adjustment ring back counterclockwise one more full turn until the
selection arrow on the baselines up with the "M" in the Medium grind selection again. Replace the set screw and
re-test the unit at all grind selections again. It should turn easily into all grind settings.
15. Replace the bean hopper. The Coffee Mill is now ready for use.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.
https://producthelp.kitchenaid.com/Countertop_Appliances/Coffee_Products/Product_Info/Coffee_Product_Assembly_and_O…
Updated: Thu, 12 Aug 2021 20:09:57 GMT
Powered by
6
To Previous Page
Loading...
