10. Place the grind adjustment ring onto the motor housing. Tighten the grind adjustment ring by applying downward
pressure and turning clockwise several rotations until the grind adjustment ring cannot be turned any further.
11. To set the grind properly, rotate the grind adjustment ringback counterclockwise until the selection arrow on the
baselines up with the "M" in the Medium grind selection.
12. Replace the set screw and tighten with a Phillips head screwdriver.
https://producthelp.kitchenaid.com/Countertop_Appliances/Coffee_Products/Product_Info/Coffee_Product_Assembly_and_O…
Updated: Thu, 12 Aug 2021 20:09:57 GMT
Powered by
5
To Next Page
Loading...
