KitchenAid A-9 - Electrical Requirements; Electrical Safety Warning; Troubleshooting Problems; Common Issues and Solutions

5
Troubleshooting Problems
If your Coffee Mill should fail to
operate properly, check the
following:
1. Is the Coffee Mill plugged in?
2. Is the fuse in the circuit to the
Coffee Mill in working order? If
you have a circuit breaker box,
make sure the circuit is closed.
3. Try unplugging the Coffee Mill,
then plug it back in.
If the problem cannot be corrected
with the above steps, see the
KitchenAid Warranty on page 3.
Do not return the Coffee Mill to the
retailer – they do not provide service.
Electrical Requirements
Volts: 120V A.C. only.
Hertz: 60 Hz
Grounding, 3-prong system.
15-amp branch circuit.
NOTE: Your Coffee Mill has a
3-prong grounded plug. To reduce
the risk of electrical shock, this plug
will fit in an outlet only one way. If
the plug does not fit in the outlet,
contact a qualified electrician. Do not
modify the plug in any way.
WARNING
Electrical Shock Hazard
Plug into a grounded 3-prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these
instructions can result in
death, fire, or electrical shock.