KitchenAid K400 - Care and Cleaning

8
USING THE BLENDER
NOTE: If blending hot liquids and
ingredients, start on a low speed and
then ramp up to the desired speed. Use
variable speed and run for 1-2 minutes.
0
1
2
3
4
5
P
Pulse mode: Press ( ). Turn and hold the
Control Dial from (O) to (P) as per desired
interval of time. When finished, release the
Dial to STOP.
5
IMPORTANT: Allow the Blender to fully stop
before removing the Lid, Jar, or pouring out
blended ingredients.
NOTE: Blender will not run if jar is not on
Base.
CARE AND CLEANING
48 oz
OUNCES
8oz = 1 Cup
44 oz
40 oz
36 oz
32 oz
28 oz
24 oz
20 oz
16 oz
12 oz
Unplug before cleaning. Wipe the Base
and the Power Cord with a warm, damp
cloth and dry with a soft cloth.
Dishwasher-safe, top rack only: Lid Center
Caps and Lids with Vent Well.
Blender Jar and Glass Jar can be washed in
the bottom rack.
NOTE: Do not immerse the Blender Base or cord in water. Do not use abrasive
cleansers or scouring pads to avoid scratching.
Fill half of the Jar with warm water and
add 1 or 2 drops of dish-washing liquid.
Place the Jar on the Base. Secure the Lid
and Lid Center Cap.
0
1
2
3
4
5
P
Turn from (O) to ( ). Press ( ) button
to START.
Remove and empty contents and rinse with
warm water and dry thoroughly.
1 2
3
4
W11461763A.indb 8W11461763A.indb 8 14-07-2020 10:36:5614-07-2020 10:36:56