KitchenAid KSB5010 User Manual (English)

Questions and Answers:

M
martinjessicaAug 12, 2025
Why my KitchenAid KSB5010 doesn't turn on?
- P
  Patricia CastroAug 12, 2025
  If your KitchenAid Blender doesn't run at all, and no lights are showing, start by ensuring it's properly plugged into a grounded, three-prong outlet. Then, check the power outlet to confirm it's working correctly, inspecting the breaker and wiring if necessary. If the power cord is damaged, it should be replaced. Finally, a faulty UI switch could also be the culprit, and it may need replacement.
A
Anita LopezAug 16, 2025
How to fix KitchenAid Blender jar leaking?
- D
  Danielle CarpenterAug 16, 2025
  If your KitchenAid blender jar leaks, you might be overfilling it, causing ingredients to push out. Try reducing the amount of ingredients you're blending. Also, inspect the jar and lid for any damage, and replace the jar assembly or lid if they are faulty or broken.
P
Patrick RobertsAug 20, 2025
How to reset KitchenAid KSB5010 UI when light is flashing quickly?
- C
  Christine ClarkAug 20, 2025
  If your KitchenAid Blender powers on and the UI light is flashing quickly, it indicates that the blender UI needs to be reset. To do this, turn the dial to the “OFF” position and then select the desired operating setting. Once reset to the desired setting, press “START.”
C
Christopher KnightAug 23, 2025
What to do if KitchenAid KSB5010 Blender blades do not spin properly?
- S
  Stephanie GonzalezAug 25, 2025
  If the KitchenAid Blender blades do not spin properly, first, check the blender jar assembly for any faults. With the jar removed, carefully inspect the blade movement; if it doesn't turn freely, replace the jar. Also, ensure the jar is correctly inserted into the blender base and engaged with the jar release handle. If the blade moves freely and the jar is properly inserted, but the blades still don't spin when the blender is running, the drive belt may be broken or loose and needs replacement.
A
Abigail SmithAug 27, 2025
What to do if KitchenAid Blender does not run at some selections?
- S
  Sarah PerezAug 27, 2025
  If your KitchenAid Blender doesn't run at some selections, the UI Dial/Switch Assembly might be faulty and needs replacement. Alternatively, the electrical control board could be faulty, requiring its replacement.
J
John MooreAug 31, 2025
Why does my KitchenAid KSB5010 vibrate?
- E
  Emily SandersAug 31, 2025
  If your KitchenAid Blender vibrates on the work surface, start by checking the feet for wear, dirt, or damage; replace them if necessary and clean any dirt with mild soap and water. Ensure the jar is fully seated to the tab and engages with the jar release handle. Also, inspect the belt for proper alignment to the pulleys by removing the base.
S
shannon51Sep 3, 2025
Why does my KitchenAid KSB5010 Blender run intermittently?
- O
  ortegacharlesSep 4, 2025
  If your KitchenAid Blender runs intermittently, examine the wire connections for any wear or breaks, and repair them as needed. Check the motor; if it's faulty, remove and replace the lower housing assembly. Also, inspect the power cord and switch assembly, replacing them if they are faulty.
N
Neil TaylorSep 8, 2025
What does it mean when the UI Control Light flashing slowly on KitchenAid KSB5010?
- D
  Diana BradshawSep 8, 2025
  If the UI control light on your KitchenAid Blender is flashing slowly, it means the blender is ready and waiting for your input. After you've chosen your desired setting on the UI dial, the light will continue to flash slowly until you press the 'START' button.

KitchenAid KSB5010 Specifications

General

Jar Material	Glass
Jar Capacity	56 oz
Blades	Stainless steel
Speed Settings	Variable
Dimensions	8.5 x 8.5 x 15.5 inches
Weight	9.5 pounds
Speeds	5
Color Options	Multiple colors available
Warranty	1 year
Wattage	500 watts