KitchenAid KSB560 Series User Manual

Blender Lights Flashing
Flashing Lights on the KitchenAid Blender
If your blender lights are flashing and the blender will not turn on, there may be a problem with the electronics. Each
model blender has different troubleshooting for flashing lights.
KSB5 Models
There may be a problem with the electronics.
Please Contact Us for further assistance.
KSB560 Models
All indicator lights are flashing at the same time.
The Blender may be overloaded. If the Blender becomes
overloaded when blending heavy ingredients, it will
automatically shut off to avoid damage to the motor.
Press OFF to reset the Blender. Remove the jar from the
base and divide the jar contents into smaller batches.
Adding liquid to the jar may also reduce the load on the
Blender.
Indicator lights are flashing alternately.
The Blender may be jammed. If it's jammed, the Blender
will stop running to avoid damage to the motor. Press
OFF to reset the Blender. Remove the pitcher from the
base and free the blades by breaking-up or removing the
contents at the bottom of the jar.
https://producthelp.kitchenaid.com/Countertop_Appliances/Blenders/Blender_Tips_and_Tricks/Blender_Lights_Flashing
Updated: Thu, 06 Aug 2020 14:53:06 GMT
Powered by
1

KitchenAid KSB560 Series Specifications

General

Speed Settings	5
Pulse Feature	Yes
Blade Material	Stainless Steel
Capacity	56 ounces
Base Material	Metal
Warranty	1 year

Summary

KitchenAid Blender Flashing Lights Troubleshooting

General Flashing Lights on KitchenAid Blenders

Troubleshooting if blender lights flash and the unit does not turn on, indicating potential electronic issues.

KSB5 Models Flashing Lights

Troubleshooting for KSB5 models where flashing lights may indicate an electronic problem requiring assistance.

KSB560 Models: All Lights Flashing Simultaneously

When all indicator lights flash simultaneously on KSB560, it may be overloaded. Reset and divide batches.

KSB560 Models: Alternating Light Flashes

Alternating flashing lights on KSB560 suggest a jammed blender. Reset, unplug, and clear contents.

KSB1570 or KSB1575 Models Indicator Lights

KSB1570/KSB1575: No Indicator Lights Lit

If no lights are lit on KSB1570/KSB1575, check power connection and circuit breaker for issues.

KSB1570/KSB1575: All Lights Flashing Together

When all lights flash on KSB1570/KSB1575, the motor rotor may be locked. Reset and retry operation.

KSB1570/KSB1575: Single Light Flashing Alternately

Alternating single light flash on KSB1570/KSB1575 indicates a stuck key. Reset blender to resolve.

Blender Stops During Blending

Blender Stops: All Lights Flashing Simultaneously

If blender stops and all lights flash, it may be overloaded. Reset and divide contents into smaller batches.

Blender Stops: Alternating Light Flashes

If blender stops and lights flash alternately, it may be jammed. Reset and clear contents from blades.