Need help?Do you have a question about the KitchenAid KBLS36FMB01 and is the answer not in the manual?
Includes use and care guide, energy label, and service sheets.
Main cabinet structure, support brackets, and covers for the appliance body.
Various screws, clips, grommets, and bushings used in cabinet assembly.
Grommets, seals, and drain tubing for cabinet integration.
Trims for the cabinet sides and top breaker area.
Screws, hinge covers, and side trim seals for cabinet assembly.
The main top grille assembly for the appliance.
Covers and panels for the upper unit of the appliance.
Screws, nuts, clamps, and trim pieces for the top grille and unit cover.
Main refrigerator and freezer liners, and the heat exchanger cover.
Diffuser caps, baffles, and insulation for managing internal airflow.
Motors, wiring harnesses, control boards, lighting, and sensors for the liner system.
Various shelves, trim pieces, and deli pans for refrigerator storage.
Crisper and deli drawer assemblies, supports, and covers.
Drawer slides, wine racks, egg bins, screws, and trim pieces.
Main freezer door panel, trim covers, handles, and corner trims.
Magnetic door gasket and other sealing components for the freezer door.
Divider baskets, clamps, upper and lower freezer baskets.
Screws, nuts, brackets, and bushings for the freezer door and baskets.
Main door panel, trim covers, handles, and door trims for the refrigerator.
Magnetic door gasket and other sealing components for the refrigerator door.
Shelves, bins, and butter trays for the refrigerator door interior.
Screws, hinges, spacers, and end caps for door assembly.
Inverter box, compressor, and mounting hardware.
Condenser shroud, fan motor, blade, orifice, and dampener.
Control board, terminal covers, switches, wiring harnesses, and jumper wires.
Refrigerant tubing, valves, and related components for the upper unit.
Evaporator, heater components, and clamps for the lower unit.
Transition tubes for condenser and drier, and suction tubes.
Drain pan, heater support, and heater damper components.
Screws, wire ties, and clips for securing lower unit parts.
Mold and heater assembly, water fill cup, and ejector for the icemaker.
Motor, thermostat, retainer, and shut-off arm for icemaker operation.
Fill tube, valve, solenoid valve, and filter outlet.
Screws, module assembly, and mounting brackets for the icemaker.
Includes use and care guide, energy label, and service sheets.
Main cabinet structure, support brackets, and covers for the appliance body.
Various screws, clips, grommets, and bushings used in cabinet assembly.
Grommets, seals, and drain tubing for cabinet integration.
Trims for the cabinet sides and top breaker area.
Screws, hinge covers, and side trim seals for cabinet assembly.
The main top grille assembly for the appliance.
Covers and panels for the upper unit of the appliance.
Screws, nuts, clamps, and trim pieces for the top grille and unit cover.
Main refrigerator and freezer liners, and the heat exchanger cover.
Diffuser caps, baffles, and insulation for managing internal airflow.
Motors, wiring harnesses, control boards, lighting, and sensors for the liner system.
Various shelves, trim pieces, and deli pans for refrigerator storage.
Crisper and deli drawer assemblies, supports, and covers.
Drawer slides, wine racks, egg bins, screws, and trim pieces.
Main freezer door panel, trim covers, handles, and corner trims.
Magnetic door gasket and other sealing components for the freezer door.
Divider baskets, clamps, upper and lower freezer baskets.
Screws, nuts, brackets, and bushings for the freezer door and baskets.
Main door panel, trim covers, handles, and door trims for the refrigerator.
Magnetic door gasket and other sealing components for the refrigerator door.
Shelves, bins, and butter trays for the refrigerator door interior.
Screws, hinges, spacers, and end caps for door assembly.
Inverter box, compressor, and mounting hardware.
Condenser shroud, fan motor, blade, orifice, and dampener.
Control board, terminal covers, switches, wiring harnesses, and jumper wires.
Refrigerant tubing, valves, and related components for the upper unit.
Evaporator, heater components, and clamps for the lower unit.
Transition tubes for condenser and drier, and suction tubes.
Drain pan, heater support, and heater damper components.
Screws, wire ties, and clips for securing lower unit parts.
Mold and heater assembly, water fill cup, and ejector for the icemaker.
Motor, thermostat, retainer, and shut-off arm for icemaker operation.
Fill tube, valve, solenoid valve, and filter outlet.
Screws, module assembly, and mounting brackets for the icemaker.
General| Brand | KitchenAid |
|---|---|
| Model | KBLS36FMB01 |
| Category | Refrigerator |
| Type | French Door |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Color | Black Stainless Steel |
| Energy Star Certified | Yes |
| Configuration | French Door |
| Counter-Depth | Yes |
| Width | 35.75 inches |
To Next Page