KitchenAid KCG0702 - Using the Burr Grinder; Grind Setting Chart; Assembling and Running the Burr Grinder

ENGLISH
USING THE BURR GRINDER | 5
NOTE: The bean hopper holds a maximum of 7 oz (200 g) of beans.
HELPFUL TIP: Because partially ground coffee beans may remain between the burrs
after the Burr Grinder is turned off, it is recommended to select a ner grind setting
while the Burr Grinder is running.
This Burr Grinder offers 15 different grind levels, available in half-step increments
from 1 to 8. Select the grind by turning the grind control dial to the desired setting
on the grind settings ring, as shown in this chart. With continued use, you will be
able to rene the setting to match your own tastes.
GRIND SETTING CHART
GRIND
COFFEE
TYPE
AVERAGE
GRIND SIZE
SETTING
FINE ESPRESSO 325 microns 8
MEDIUM
SIPHON
POUR OVER
AUTOMATIC DRIP
750 microns 6
COARSE FRENCH PRESS 1250 microns 1
USING THE BURR GRINDER
ASSEMBLING AND RUNNING THE BURR GRINDER
NOTE: Before using the Burr Grinder, wipe the motor housing and cord with a clean
damp cloth. Wash the bean hopper and lid, and ground jar in hot soapy water, then
rinse and dry; or, wash in the top rack of a dishwasher.
1
Make certain the Burr Grinder is
unplugged. Attach the bean hopper
to the top of the motor housing,
turning clockwise until snug.
2
Slide the ground jar onto the
jar platform, making certain it
is centered in the middle.