28
Use a 5/16" nut driver to reinstall the screws through the holes in
the access panels.
IF DISHWASHER DOES NOT OPERATE
First try the solutions suggested here to possibly avoid the cost
of a service call.
■ Has the circuit breaker tripped or the house fuse blown?
■ Is the door closed tightly and latched?
■ Has the cycle been set correctly to start the dishwasher?
■ Is the water turned on?
■ Is the oat switch wire under the product connected to the oat
switch?
■ Make sure control lock is not on.
If none of these possible solutions work, please see the Quick
Start Guide for service contact information.
52. Reinstall access panels
To Next Page
Loading...
