KitchenAid KEDT105V - Electronic Clock;Oven Controls

Electronic Clock/Oven Controls
Cancel
Stop Cook
Bake Broil Clean Time Time Clock Timer
Set
There are three parts in the clock/oven
control section:
- The digital display
- The command buttons.
- The Set knob.
Instructions for each part of the control
are covered on the following pages.
Read them carefully
When you first plug in the range, or
if your electricity was off for a while,
the display will show the last time of
day set.
DIGITAL DISPLAY/CLOCK
When you are not using the oven, this is
an accurate digital clock that shows
time of day in hours and minutes.
When you are using the oven, the
display shows temperature settings and
indicates which command buttons
have been pressed. The display also
shows any oven time settings you select:
the Timer setting in minutes and
seconds and the Cook Time and/or Stop
Time settings in hours and minutes.
COMMAND BUTTONS
The command buttons tell the oven
what to do and in what order. A few
examples:
• Clock tells the oven you are going to
set the clock.
• Cancel tells the oven to turn off.
Each command button (except Cancel)
has its own light. The light comes on
when you touch the command buttons.
SET KNOB
Once you've pushed a command button
to tell the oven what you want it to do,
you'll use the Set knob to set a
temperature or time. Turning the Set
knob clockwise increases the number on
the display. Turning the Set knob
counterclockwise decreases the number
on the display.
SETTING THE ELECTRONIC CLOCK
1. Push the Clock button. The TIME
light will show in the display.
2. Turn the Set knob until the correct
time shows in the display.
3. Push the Cancel button to start clock
operation.
nn
•uu
USING THE ELECTRONIC TIMER
The Timer does not start or stop the
oven. It works like a kitchen timer. It can
be set in minutes and seconds up to 9
hours and 50 minutes. You will hear
3 beeps when the set time is up.
1. Push the Timer button. The TIMER
light will come on and the display
will show “00.”
Continued on next page