ENGLISH
23
CARE AND CLEANING
DESCALING
A message is shown on the Display when the machine has to be descaled. The descaling
program can also be started manually at any time. Beverages can still be drawn, but we
recommend carrying out the cleaning program as soon as possible.
Put a sufficiently large container (≥ 0.5 L)
under the Dispenser outlet.
Follow the instructions on the Display up
to the end of the program.
2
Select and confirm the instruction or press
the “ ” icon and select the “Descaling”
by pressing the “ ” icon.
1
The machine then heats up and is ready
for operation again.
3
IMPORTANT: The running descaling program must not be interrupted. Do not use
vinegar or vinegar-based materials for descaling, but use products recommended for
fully automatic coffee machines. The filter (if present) must be removed from the Water
Tank prior to the start of the descaling program.
During descaling, please follow exactly the sequence of the displays:
- First pour in the corresponding amount of water up to the 0.5 L mark and then add the
descaler.
- Do not in reverse order. Observe the instructions of the descaler manufacturer.
NOTE: Descaling agents are known to stain the steel parts of the machine. Ensure that
you have a large container under the brew unit to avoid splashing and spills. If stain
occurs, make sure to use an oxalic acid or citric acid product to remove properly. When
applying cleaner, rub with the grain and rinse properly after cleaning. For a nice shine,
add stainless cleaner after cleaning.
To Next Page
Loading...
