6 | USING THE FOOD CHOPPER
USING THE FOOD CHOPPER
1
Be sure the Food Chopper is
unplugged. Align the tabs on
the work bowl with the L-slots
on the base. Twist work bowl
counterclockwise to lock into place.
2
Fit the blade over the shaft in the
center of the work bowl, rotate,
and press down until it locks into
operating position.
3
Place ingredients to be processed
into the work bowl.
4
Place the lid on the work bowl,
aligning the L-slots on the lid with
the tabs on the work bowl. Twist lid
counterclockwise to lock into place as
shown below.
OPERATING YOUR FOOD CHOPPER
NOTE: Work bowl and lid must be locked
in place for the Food Chopper to operate.
W10407579D.indb 6 2/18/2019 3:53:04 PM
To Next Page
Loading...
