USING THE FOOD CHOPPER | 7
USING THE FOOD CHOPPER
5
Plug power cord into electrical outlet.
Press and hold Chop or Puree button
to start processing.
6
When ingredients are chopped to the
desired consistency, release the Chop
or Puree button.
NOTE: Food Chopper will not operate if both buttons are pressed at the same time.
NOTE: Use the wet ingredient adder to add liquid ingredients while processing,
if desired. See “Operating Tips for Great Results.”
1
Once the blade has stopped spinning,
remove lid by twisting it clockwise
and lifting it off.
2
Remove the work bowl from the base
by twisting it clockwise and lifting it
off. Blade locks on the shaft to stay in
place while you pour out ingredients.
3
Use a spatula to remove ingredients
from the work bowl.
4
To remove blade for cleaning, pull
the blade straight up to unlock and
remove it from the work bowl.
REMOVING INGREDIENTS
W10407579D.indb 7 2/18/2019 3:53:04 PM
To Next Page
Loading...
