To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid KGSS907SSS02 and is the answer not in the manual?
General| Brand | KitchenAid |
|---|---|
| Model | KGSS907SSS02 |
| Category | Ranges |
| Language | English |
Explains safety symbols, warnings, and steps to take if a gas leak is detected.
Emphasizes the importance of the anti-tip bracket to prevent tipping hazards.
Lists necessary tools, parts, and specifies location requirements and clearances.
Specific guidelines for installing the range in mobile homes.
Provides measurements for freestanding and slide-in ranges, and initial clearance notes.
Specifies required installation clearances for freestanding gas ranges.
Specifies required installation clearances for slide-in gas ranges.
Details electrical shock hazards, grounding, and polarity requirements for safe operation.
Covers explosion hazards, gas supply lines, connectors, and pressure requirements.
Explains the function and proper use of the gas pressure regulator.
Provides steps for safely unpacking the appliance.
Guides on measuring the correct height for range installation.
Instructions on adjusting the range's leveling legs for stability.
Details the process of installing the anti-tip bracket for safety.
Steps for removing the lower drawer to access internal components.
Instructions for connecting the gas supply to the range.
Describes how to connect using flexible or rigid gas lines.
Final steps for completing the gas connection and checking for leaks.
Explains the electronic ignition process and initial flame setup.
Guides on adjusting the flame height for surface burners.
Procedures for checking the bake and broil burners' function and flame.
How to adjust the oven bake and broil burner flames if needed.
Instructions for reinstalling oven racks and drawers.
Final checks and troubleshooting steps before use.
Details the process of converting the gas pressure regulator for LP gas.
How to replace orifice spuds for standard surface burners for LP gas.
How to replace orifice spuds for Triple Tier® burners for LP gas.
Steps to adjust the oven bake burner orifice hood for gas conversion.
Steps to adjust the oven broil burner orifice hood for gas conversion.
Steps for converting the gas pressure regulator back to Natural gas.
How to replace orifice spuds for standard burners from LP to Natural gas.
How to replace orifice spuds for Triple Tier® burners from LP to Natural gas.
