SETTING UP YOUR HAND MIXER
Removing the accessories
2
Insert the accessory shaft with the collar
(D) into the larger opening (B) of the
hand mixer. Align the flanges on the
shaft with the slots in the opening. Push
to lock into place.
2
Press the ejector button to release
the accessories from the Hand Mixer,
then remove them.
1
If the Hand Mixer is running, stop
the Hand Mixer by sliding the Power
switch to “OFF”. Then unplug from
the electrical outlet.
NOTE: An accessory shaft without a collar
may be used in either opening (A or B). Those
with a collar may only be used in the larger
opening (B).
C
D
D
B
B
A
Paired accessories (beaters, optional dough
hooks) include one accessory with a collar
(D), and one without (C). Single accessories
come with a collar (D) (liquid blending rod)
or without (C) (whisk).
3
Insert the accessory without a collar (C)
into the smaller opening (A). Align and
push to lock into place.
W10586270B_v03.indd 8 2/17/15 4:08 PM
To Next Page
Loading...
Need help?
General
