KitchenAid KIRD862HSS

To Next Page

26 1/8"

8 1/4"

33 1/2"

1 7/8"

36"

2 1/8"Vent overall depth:

33 1/2"

1 7/8"

36"

2 1/8"

Vent Intake

Cabinet Floor

Wall View

(not to scale)

Countertop

Vent Junction Box

Vent

Raised

36"

Raised vent distance:

Vent height below countertop:

26 1/8"

8 1/4"

Vent Intake

Cooktop

Interior housing

Side View

(not to scale)

2 1/8"

6 1/8"

• Electrical requirements: Voltage 115, single phase,

60Hz. AC. Ampere 15. Grounded circuit required.

Locate power supply junction box at lower right corner

of cabinet.

• KitchenAid exterior power system, Part No.

KPED890, is required to complete this system.

• Installation location should be away from strong draft

areas, such as windows doors and strong heating

vents. Before making cutout, check that vent and

cooktop location will clear cabinet walls, backsplash

and rear wall studs inside cabinet.

• All openings in wall or floor where vent is to be

installed must be sealed.

• See cooktop manufacturer's installation instructions

for cooktop cutout depth and width.

• NOT approved for use in mobile homes.

• 36" minimum base cabinet is required. 3 1/2" depth

clearance from countertop to top of cabinet drawers (or

other obstructions in base cabinet) is required.

• Cabinet drawer may need to be removed and

permanent drawer front installed.

• Use either 9" round (recommended) or 3 1/4" x 10"

ductwork. Maximum length of ductwork for both 9"

round and 3 1/4" x 10" is 55 feet.

• Stainless Steel finish.

See pages 2-3 for additional information

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600

• Dimensions (Actual Size) •

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •

notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •

it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •

Sheets for each project, as opposed to the problems, time, costs, and risks

associated with reusing old Data Sheets.

36" Retractable Downdraft Vent System:

KIRD862HSS

Kit: KPED890T

• Product Model Number (s): •

Subject to change without notice. This system is designed to

be updated daily if necessary. Dimension Express is not

responsible for use of superseded, voided, or outdated data

sheets. Because of the difficulty or impracticability of deter-

mining actual damages, liability of Dimension Express shall

not exceed $50.00.

This Data Sheet Includes Information On

BN53 • A284B149C116 • 11751 • 001311 • 215841 • 52906

• Additional Information •

284

Vent overall width:

Vent cutout depth:

Vent cutout width:

Cutout vent dimensions

Overall vent dimensions

Cooktop

Backsplash

Countertop front edge

KitchenAid

Need help?

Do you have a question about the KitchenAid KIRD862HSS and is the answer not in the manual?

The KitchenAid 36" Retractable Downdraft Vent System is an innovative ventilation solution designed to integrate seamlessly into your kitchen countertop, providing effective removal of smoke, steam, and cooking odors directly at the source. Unlike traditional overhead range hoods, this downdraft system rises from the countertop when in use and retracts discreetly when not needed, maintaining a clean and unobstructed kitchen aesthetic. It is specifically designed to work in conjunction with KitchenAid cooktops, offering a cohesive and high-performance ventilation package.

Function Description

The primary function of the KitchenAid 36" Retractable Downdraft Vent System is to capture and exhaust airborne contaminants produced during cooking. When activated, the vent system gracefully rises from its hidden position behind the cooktop, creating a barrier that draws cooking fumes downwards and away from the kitchen environment. This downdraft action is particularly effective for island or peninsula cooktop installations where overhead ventilation might be impractical or undesirable.

The system operates by drawing air through an intake located at the top of the rising vent. This air, laden with smoke, steam, and odors, is then channeled through internal ductwork to an external blower system (KitchenAid external blower kit KPED890T is required and sold separately). The external blower expels the contaminated air outside the home, ensuring a fresh and clean indoor air quality. The design prioritizes efficiency, aiming to capture pollutants before they have a chance to disperse into the room.

The retraction mechanism is smooth and quiet, allowing the vent to disappear completely into the countertop when not in use. This not only enhances the visual appeal of the kitchen but also frees up valuable overhead space, contributing to an open and airy feel. The system is engineered for ease of operation, typically controlled via a simple switch or button located on the cooktop or an adjacent surface.

Usage Features

The KitchenAid 36" Retractable Downdraft Vent System offers several features designed to enhance user convenience and performance:

Discreet Integration: The most prominent feature is its ability to retract flush with the countertop, making it virtually invisible when not in operation. This is ideal for modern kitchen designs that prioritize minimalist aesthetics and unobstructed views.
Effective Downdraft Ventilation: By drawing air downwards, the system efficiently captures cooking byproducts directly at the cooktop level. This method is often more effective than traditional overhead hoods for certain cooking styles and kitchen layouts, especially for larger pots and pans where fumes might otherwise escape.
Compatibility with KitchenAid Cooktops: The system is engineered to integrate perfectly with various KitchenAid cooktop models, ensuring a precise fit and optimal performance. This compatibility extends to the aesthetic, creating a cohesive look across the cooking area.
Flexible Ductwork Options: The system supports both 9" round (recommended) and 3 1/4" x 10" rectangular ductwork, providing flexibility for installation based on existing home infrastructure or new construction requirements. This adaptability helps in routing the exhaust to the most suitable exterior point, whether through a wall or roof.
Optimized Performance Guidelines: To ensure maximum efficiency, the system provides clear guidelines for ductwork installation, including recommendations on the number of elbows, straight duct lengths, and the use of metal ductwork. Adhering to these guidelines helps maintain optimal airflow and minimize noise.
Space-Saving Design: By eliminating the need for an overhead hood, the downdraft system frees up cabinet space above the cooktop and allows for more creative kitchen designs, such as open shelving or decorative elements.
Easy Activation: The vent system is typically activated with a simple control, allowing users to raise and lower the vent as needed with minimal effort.

Maintenance Features

Maintaining the KitchenAid 36" Retractable Downdraft Vent System is straightforward, designed to ensure long-term performance and cleanliness:

Removable Grease Filters: The system is equipped with grease filters that are easily removable for cleaning. These filters are crucial for trapping grease particles from cooking fumes, preventing them from accumulating in the ductwork and blower. Regular cleaning of these filters, typically by hand washing or in a dishwasher, is essential for maintaining optimal airflow and preventing odors.
Accessible Vent Intake: The vent intake area, which is exposed when the system is raised, can be easily wiped down to remove any splatters or residue from cooking. This helps keep the visible components clean and hygienic.
Ductwork Inspection (Periodic): While not a frequent task, periodic inspection of the ductwork is recommended to ensure there are no blockages or leaks that could impede performance. This is particularly important if there's a noticeable decrease in suction power.
External Blower Maintenance: As the system relies on an external blower, maintenance of the blower unit itself, as per its specific manual, is also part of the overall system upkeep. This may involve cleaning the blower fan or checking for debris.
Stainless Steel Finish: The visible components of the vent system are typically made of stainless steel, which is durable and relatively easy to clean. Regular wiping with a damp cloth and mild detergent, followed by drying, helps maintain its lustrous appearance and prevents smudges or fingerprints.
Sealed Openings: The installation instructions emphasize sealing all openings in the wall or floor where the vent is installed. This not only ensures proper ventilation but also helps prevent the ingress of pests or unconditioned air, contributing to the system's overall efficiency and longevity.

By combining powerful ventilation with an elegant, retractable design, the KitchenAid 36" Retractable Downdraft Vent System offers a sophisticated and practical solution for modern kitchens, ensuring a clean and comfortable cooking environment while preserving the aesthetic integrity of the space.

KitchenAid KIRD862HSS Specifications

General

Brand	KitchenAid
Model	KIRD862HSS
Color	Stainless Steel
Airflow	600 CFM
Number of Fan Speeds	4
Lighting	LED
Filters	2
Filter Material	Aluminum
Voltage	120 V
Width	36 inch
Venting Type	Ducted
Controls	Electronic