7
English
ASSEMBLING THE BLENDERPARTS AND FEATURES
2
Rotate pitcher clockwise, approximately
1/8 turn until pitcher clicks into place.
3
Adjust the length of the Blender power
cord.
4
Put lid on pitcher.
NOTE: When properly positioned, pitcher
will rest completely on Blender base. If not,
repeat steps 1 and 2.
6
Before removing the pitcher from the
base, always press POWER to stop the
flashing lights and unplug the power
cord.
5
Before using the Blender, plug into a
grounded 3-prong outlet, and press
POWER. The Power indicator light will
flash when ready.
ASSEMBLING THE BLENDER
W10770345B_ENv02.indd 7 4/7/15 8:51 AM
To Next Page
Loading...
