8 | USING THE BLENDER
5
Utilize the Flex Edge tamper
accessory as needed for optimal
blending performance. Remove
the ingredient-measuring cap only,
and leave the lid in place. Stir or
press contents down towards the
blade. When you are finished,
replace the ingredient-measuring
cap to the blender jar lid before
resuming blending.
6
If desired, use the Pulse function
for a momentary boost of speed
while blending on the variable
speed settings.
PRESS AND HOLD the PULSE toggle
switch up for a faster pulse, or down
for a slower pulse.
7
After blending, flip the START/STOP
toggle switch up or down. Allow the
Blender to come to a complete stop
before removing the lid and pouring
your blended ingredients.
NOTE: The Pulse function may also be
used on its own as a separate blending
function while the Blender is in Standby
mode. Pulse is not available when running
a preset program.
USING THE BLENDER
W10797340B_EN_v07.indd 8 3/28/16 3:27 PM
To Next Page
Loading...
