KitchenAid KSRB22Q - Page 14

USING THE REFRIGERATOR
Removing the ice maker storage bin
The ice maker storage bin holds up to
8.5 pounds (3.8 kg) of ice. Remove unused
ice periodically to reduce the potential for
off-taste or odor build-up In Ice.
IMPORTANT: The first few batches of Ice from
the Ice maker may have an off-taste. This Is
from new plumbing and parts. Throw the first
few batches of Ice away and make a new
supply.
To remove storage bin:
Remove the storage bin to supply targe
quantities of ice or for cleaning.
1. Pull the covering panel out from the
bottom and slide it to the rear.
2. Uft the Ice maker signal arm until you feel
It click Into the OFF position. Ice can still be
dispensed when the freezer door Is closed,
but no more can be made.
3. Uft the front of the storage bln and pull It
out.
4. Empty the bln. Use hot or warm water to
melt the ice If necessary. Never use
anything sharp to break up the Ice In the
bin. This can damage the bln and
dispenser mechanism.
5. Wash with mild detergent. Rinse and dry
well. Do not use harsh or abrasive cleaners
or solvents.
Panel
To replace storage bln:
1. Make sure bln is pushed in all the way.
2. Push the Ice maker signal arm down to the
ON position to restart Ice production.
3. Lower covering panel.
14