KitchenAid KSRB22Q - Page 8

USING THE REFRIGERATOR
Changing the control settings
To change the temperature settings, follow
the steps below:
1. Adjust the Refrigerator Control first.
2. Walt at least 24 hours before making
further adjustments. This gives the
refrigerator and/or freezer time to reach
the set temperature.
3. Adjust the Freezer Control If necessary.
To make the refrigerator or freezer colder,
slide the control toward the number 4 setting.
To make the refrigerator or freezer less cold,
slide the control toward the number 1 setting.
Changing either the Refrigerator Control or
the Freezer Control will affect the
temperatures of both compartments.
Use the settings listed in the chart below as a
guideline when adjusting the temperature
controls.
The following reasons can cause the
conditions listed below:
• Door opened often
• Large amount of food added
• Room temperature too warm
• Room temperature too cold (Refrigerator
can't cycle often enough.)
• Controls not set correctly for your
conditions
• Heavy Ice usage
CONDITION:
RECOMMENDED CONTROL SETTING ADJUSTMENTS:
Refrigerator
Freezer
Refrigerator section Is too warm
3
2
Freezer section Is too warm
3
3
Refrigerator section is too cold
3
3
Ice isn't made fast enough
3
3
Both sections are too warm
3
3
Removing the refrigerator door
To remove bins:
1. Uftblnup.
2. Pull bln straight out.
To replace bins:
1. Hold back of bin above desired bln guide.
2. Push bin back and down until It stops.
bins
8