KitchenAid KSRB22Q - Page 9

USING THE REFRIGERATOR
Adjusting the bln glides
Use the bln glides to secure odd-shaped
Items In the door bins or to separate other
Items.
To adjust the glides:
1. Grasp glide.
2. Move glide along bln.
Removing the can dispensers
Each dispenser holds 5 beverage cans in a
convenient place, leaving more shelf space
for larger items.
To remove dispenser:
1. Lift dispenser up.
2. Pull dispenser straight out.
To replace dispenser:
1. Hold back of dispenser above desired
guide.
2. Push dispenser back and down until it
stops.
IMPORTANT: When replacing the can
dispensers, you must replace the bottom
dispenser first.
Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator.
To remove shelves:
1. Tilt shelf up at front.
2. Lift shelf up at back.
3. Pull shelf straight out.
IMPORTANT: Glass shelves are heavy. Handle
with care.
To replace shelves:
1. Guide the rear hooks of shelf Into slots In
the shelf supports.
2. Tilt shelf up at front until hooks drop Into
slots. Lower front of shelf to level position.
3. Check the stability of the shelf to be sure
hooks have been inserted properly.
9